Answers are grounded in this paper and cite their sources.
The voltammetric behavior of a series of thiopurines [including 6-mercaptopurine (6MP), 2-mercaptopurine (2MP), 6-mercaptoguanine (6MG), 2-thioxanthine (2TX), and 6-thioxanthine (6TX)] at a silver electrode modified in situ with cetyltrimethylammonium bromide (CTAB) is described. Thiopurines can be anodically accumulated at a silver surface as sparingly soluble silver salts; when the potential is made more negative the insoluble compounds are stripped cathodically yielding current peaks at about –1.25 V (vs. Ag/AgCl). In the presence of CTAB the accumulation of thiopurines is greatly improved and the stripping peaks are enhanced; in addition, the randomness of the stripping process is reduced and the stripping-peak width is decreased. The role of CTAB in the electrochemical mechanism is discussed. Additionally, it was found that when CTAB was present 2TX and 2MP gave sharper and higher peaks than did 6MP, 6TX, or 6MG, because of the difference in their accumulation and stripping efficiencies. Analyses of these thiopurines by cathodic stripping voltammetry (CSV) have been developed. Linearity between the current and concentration exists for a range of 10–7 to 10–6 M thiopurines. The detection limits (s/n=3) are 0.05 to 0.1 μM after a accumulation time of 8 min. The procedure can be used in both neutral and basic solutions.
No takes yet. Share an insight, caveat, or question.
Zeng et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: