Answers are grounded in this paper and cite their sources.
In applications with a wide constant power speed range, the use of conventional permanent magnet machines is complicated by their uncontrolled magnetic flux, increased losses at high speeds, increased inverter current, and dangerous open circuit back EMF. For this reason, synchronous machines without magnets and with a field winding on the rotor are increasingly being used in traction applications. However, due to high electrical losses in the field winding, rotor cooling becomes a critical issue. An alternative is to use hybrid excited machines, which retain the advantages of electrically excited machines while significantly reducing rotor losses. This paper presents a comparison between a conventional electrically excited machine and a novel hybrid excited machine for traction applications with a wide constant power speed range of 9.3:1 (4200 to 450 rpm, mechanical power 23.6 kW). Both machines have the same external dimensions and were optimized using the same optimization algorithm. It is shown that the hybrid excited machine provides a reduction in rotor losses by 2.0–3.25 times depending on load conditions. Its total loss is also reduced, although its cost of active materials increased by a factor of 1.6 due to the use of permanent magnets.
No takes yet. Share an insight, caveat, or question.
Dmitrievskii et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: