Answers are grounded in this paper and cite their sources.
The potential of using activated carbon derived from a biodegradable waste material, i.e., jackfruit seeds (JS), for emulsified oil adsorption has been investigated in this study. Jackfruit seed-based activated carbons (JSAC) have been synthesized using a chemical activation method, with different impregnation ratios of ZnCl2 to JS (1:1, 1.5:1, and 2:1 wt./wt.) and carbonized at 500 °C. The resultant adsorbents were characterized using scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), energy dispersive X-ray (EDX), Brunauer-Emmett-Teller (BET) analysis, and X‐ray diffraction (XRD). The effects of different process parameters have been evaluated based on the removal percentage of emulsified oil and oil adsorption capacity in a batch adsorption system. The results showed that the JSAC sample synthesized with the impregnation ratio of 2:1 wt./wt. of ZnCl2 to JS exhibited the highest oil adsorption capacity of 73.63 ± 0.18 mg/g. This sample was found to be porous and amorphous, with a high surface area of 481.89 m2/g compared to the surface area of raw JS of 11.04 m2/g. There was an increase in carbon (C) content with functional groups, such as C = C and C-O after the adsorbents underwent chemical activation and carbonization. The Langmuir isotherm model has the best fit with the experimental data. The adsorption kinetics analysis showed that the pseudo-first-order kinetics model has the best fit, which suggested that physisorption occurred between the JSAC and oil molecules. The overall results showed that the JSAC was a promising candidate as a renewable adsorbent for emulsified oil adsorption.
No takes yet. Share an insight, caveat, or question.
Khor et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: