Answers are grounded in this paper and cite their sources.
Carbon nanofibers (CNF) and single-walled carbon nanotubes (SWCNT) screen printed electrodes (SPEs) are used for bi-metal, Pd-Cu, modification. Pd nanoparticles (NPs) are deposited first on the pre-reduced carbon SPEs by means of a spontaneous electroless process in the absence of solute reductants. Copper is deposited in a next step under galavanostatic conditions. For both electrodes the Pd deposit consists of NPs with sizes in the 10-ths of nm range with a much denser population and larger amount of the metallic phase in the SWCNT case. The copper deposit on the Pd-modified SPEs differs markedly depending on the type of the underlying substrate with a three times larger mass ratio Pd/Cu of the deposited metals for the SWCNT electrode compared to the CNF one. Nitrate detection is studied on the Cu- and Pd-Cu-modified electrodes in slightly acidic sulfate solution by means of linear sweep voltammetry. The comparison of the mono- and bi-metal- modified electrodes shows a significant enhancement of the nitrate-related reductive currents at the Pd-Cu-modified carbon SPEs. Between the two bi-metal modified electrodes the SWCNT-based one has a higher sensitivity and a larger concentration range of reproducible electroanalytical signal. The non-linear concentration dependence of the nitrate reduction peak currents is modeled by means of a Langmuir type of equation and used for recovery measurements. The Pd-Cu-modified SWCNT-based SPE shows a good stability of the metallic phases over extended nitrate reduction measurements series.
No takes yet. Share an insight, caveat, or question.
Hyusein et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: