This is the authors' abstract. We don't add key points for this paper.
Emulsified oily wastewater is difficult to treat because of its complex composition and high stability. This study developed a modified polyvinylidene fluoride (PVDF) membrane by integrating microcrystalline cellulose (MCC), tannic acid (TA), polydopamine (PDA), and controlled surface patterning, thereby combining multi-component chemical functionalization with hierarchical surface structuring. The membrane was fabricated by non-solvent-induced phase separation, surface embossing, MCC modification and regeneration, TA deposition, and PDA self-polymerization. The optimized D4 membrane, prepared with 3% MCC, 1% TA, 6 h PDA polymerization, and a 20 μm imprinting depth, reduced the water contact angle from 81.7° to 44.0° and increased porosity from 67.32% to 82.67%. For edible-oil, engine-oil, and diesel-oil emulsions, D4 achieved fluxes of 170.24, 210.83, and 223.91 L·m⁻²·h⁻¹ with rejection efficiencies of 94.73%, 98.03%, and 95.63%, respectively. In BSA fouling tests, FRR, Rt, Rr, and Rir were 89.6%, 40.3%, 29.9%, and 10.4%, respectively. The improved performance was associated with enhanced hydrophilicity and the SEM-observed peak–valley structure, supporting improved wetting, mass transfer, and fouling reversibility.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: