Answers are grounded in this paper and cite their sources.
To overcome limitations of existing air-cleaning filters in capturing and deactivating aerosolized microorganisms, this study was embarked to evaluate novel Ag, Zn, and Fe nanoparticle-doped cotton filters (AgCt, ZnCt, FeCt), as biocidal filters for bioaerosol attenuation. To evaluate the biocidal activity of the nanocomposite filters, the survival of lab-generated E. coli after collection on each filter material was compared to collection on an undoped cotton control filter and in a BioSampler. Relative humidity (RH) affected the survival of bacteria on the filters, and the optimal RH was found to be 50 ± 5%. The physical removal efficiency (PRE) determined by an optical particle counter was 99.9 ± 0.7% for ZnCt, 97.4 ± 1.2% for AgCt, and 97.3 ± 0.6% for FeCt, where the control showed only 77.4 ± 6.3% for particles > 500 nm. The doped filters showed 100% viable removal efficiency (VRE). Importantly, the VRE of the nanocomposite filters after four cycles remained nearly 99% and was greater than the cotton control filter at 76.6 ± 3.2%. Adding to its benefits, the AgCt filters had a lower pressure drop than the FeCt and ZnCt filters and the cotton control. The permeability for the cotton control filter was 3.38 × 10−11 m2 while that for the AgCt filter was slightly higher (3.64 × 10−11 m2) than the other filters as well. Overall, these results suggest that nanocomposite-doped filter media, particularly AgCt, can provide effective protection against airborne pathogens with a lower pressure drop, elevated collection efficiency, and better disinfection capability as compared to untreated cotton filters, which are all important features for practical biocidal applications.
No takes yet. Share an insight, caveat, or question.
Ali et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: