Answers are grounded in this paper and cite their sources.
The objective of the present study was to evaluate the corrosion properties of carbon steel in supercritical carbon dioxide (CO2)/brine mixtures related to the deep water oil production development. Corrosion tests were performed in 25 wt% sodium chloride (NaCl) solution under different CO2 partial pressures (4, 8, 12 MPa) and temperatures (65°C, 90°C). Corrosion behavior of carbon steel was evaluated using electrochemical methods (linear polarization resistance [LPR] and electrochemical impedance spectroscopy [EIS]), weight-loss measurements, and surface analytical techniques (scanning electron microscopy [SEM], energy-dispersive x-ray spectroscopy [EDS], x-ray diffraction [XRD], and infinite focus microscopy [IFM]). The corrosion rates measured at 65°C showed a high corrosion rate (~10 mm/y) and a slight difference with pressure. Under these conditions, the sample surface was locally covered by iron carbide (Fe3C), which is porous and non-protective. However, the corrosion rates measured at 90°C increased with time at the initial period of the test and decreased to a very low value (~0.05 mm/y) due to the formation of protective iron carbonate (FeCO3) layer regardless the CO2 partial pressure.
No takes yet. Share an insight, caveat, or question.
Choi et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: