Answers are grounded in this paper and cite their sources.
EMI shielding metal-mesh pattern was prepared on the plastic film by electrohydrodynamic (EHD) jet printing with Ag ink. The printed Ag line width in the mesh was 9.72 µm which was small enough not to be distinctly detected by human eyes. The line-to-line spacing (pitch) in the mesh pattern was modulated in order to investigate the electrical and optical properties of the EHD jet-printed metal-mesh layers. The pitch of 300 µm in the mesh led to the sheet resistance of 7 Ω/sq, the transmittance of 88.2%, and the haze less than 1%. Even though the decrease in the pitch resulted in the improvement on the electrical property of the metal-mesh layer, it was found that the decrease in the pitch simultaneously degraded the optical property such as transparency and haze. Electromagnetic interference shielding effectiveness (EMI SE) of the EHD jet-printed metal-mesh was investigated over the X-band frequency range (8–12 GHz). It turned out that the EHD jet-printed metal-mesh showed a high EMI SE of 20 dB which indicated that the mesh layer can be used in the various application of electronics for the EMI shielding purpose.
No takes yet. Share an insight, caveat, or question.
Vishwanath et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: