Answers are grounded in this paper and cite their sources.
Poly(ether-ether-ketone) (PEEK)s are a group of polymeric biomaterials with excellent mechanical properties, chemical stability, and nonmagnetism. In the present study, we propose a novel self-initiated surface graft polymerization technique, using which we demonstrate the fabrication of a highly hydrophilic and biocompatible nanometer-scale layer on the surfaces of PEEK and carbon fiber-reinforced PEEK (CFR-PEEK) by the photoinduced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) without using any photoinitiators. The thus formed hydrophilic and smooth 100-nm-thick PMPC-grafted layer caused a significant reduction in the sliding friction of the bearing interface because the thin water film and hydrated PMPC layer acted as extremely efficient lubricants (so-called fluid-film lubrication or hydration lubrication). Fluid-film lubrication suppressed the direct contact of the counter-bearing surface with the PEEK substrate and thus reduced the frictional force. A PMPC-grafted layer is therefore expected to significantly increase bearing durability. Furthermore, the PMPC-grafted layer shows unique phenomena, e.g., it prevents damage of the metal counter surface regardless of the carbon fiber content of CFR-PEEK. Smart PEEK using the self-initiated surface graft polymerization of MPC should lead to development of novel orthopedic bearings.
No takes yet. Share an insight, caveat, or question.
Kyomoto et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: