Answers are grounded in this paper and cite their sources.
In composite solid propellants with high aluminum (Al) content and low burning rate, incomplete combustion of the Al powder may occur. In this study, varying lithium (Li) content in Al-Li alloy powder was utilized instead of pure aluminum particles to mitigate agglomeration and enhance the combustion efficiency of solid propellants (Combustion efficiency herein refers to the completeness of metallic fuel oxidation, quantified as the ratio of actual-to-theoretical energy released during combustion) with high Al content and low burning rates. The impact of Al-Li alloy with different Li contents on combustion and agglomeration of solid propellant was investigated using explosion heat, combustion heat, differential thermal analysis (DTA), thermos-gravimetric analysis (TG), dynamic high-pressure combustion test, ignition experiment of small solid rocket motor (SRM) tests, condensation combustion product collection, and X-ray diffraction techniques (XRD). Compared with pure Al, Al-Li alloys exhibit higher combustion heat, which contributes to improved combustion efficiency in Al-Li alloy-containing propellants. DTA and TG analyses demonstrated higher reactivity and lower ignition temperatures for Al-Li alloys. High-pressure combustion experiments at 5 MPa showed that Al-Li alloy fuel significantly decreases combustion agglomeration. The results from the Ø 75 mm and Ø 165 mm SRM and XRD tests further support this finding. This study provides novel insights into the combustion and agglomeration behaviors of high-Al, low-burning-rate composite solid propellants and a supports the potential application of Al-Li alloys in advanced propellant formulations.
No takes yet. Share an insight, caveat, or question.
Xiong et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: