Methods of metal release assessment in soil water at anoxic sites

Metal mobility at contaminated sites can be assessed by soil water investigations or by leaching tests. Leaching tests are usually carried out in open contact with the atmosphere disregarding possible changes of redox conditions. This can affect the original metal speciation and distribution, particularly when anoxic samples are investigated. In this study, the applicability of common leaching tests (the German S4 test (S4), ammonium nitrate extraction (AmmN), and saturation soil extraction (SSE)) is tested for the assessment of zinc release from sulfide‐bearing flotation residues of a former ore mine. Results are compared to soil solution samples obtained by centrifugation and suction cups. The influence of sample storage on S4 leaching test results is investigated in a long‐term study to assess oxidation kinetics. Within the first 200 days the release of zinc increases with a slope of 0.1 mmol kg–1 d–1 or 6.0 mg kg–1 d–1, respectively. Since oxidation of the sulfide‐bearing samples leads to a significant overestimation of metal release, a feasible modification for the conduction of leaching tests for anoxic material is proposed where oxidation is prevented efficiently. The modified SSE is found to be the only of the tested leaching procedures, which can be recommended for the assessment of current soil water concentrations at anoxic sites if direct investigation of the soil water is impossible due to technical reasons.