Answers are grounded in this paper and cite their sources.
The purpose of this paper is to discuss condition monitoring (CM) of medium voltage electrical cables by means of partial discharge (PD) measurements. Electrical cables are exposed to a variety of operational and environmental stressors. The stressors will lead to the degradation of the cable's insulation material and ultimately to cable failure. The premature failure of cables can cause blackouts and will have a significant effect on the safety of such a network. It is therefore crucial to constantly monitor the condition of electrical cables. The first part of this paper is focussed on fundamental theory concepts regarding CM of electrical cables as well as PD. The derivation of mathematical models for the simulation of PD is also discussed. The simulation of discharge activity is due to a single void within the insulation material of medium voltage cross-linked polyethylene (XLPE) cables. The simulations were performed in the MATLAB¯ Simulink¯ environment, in order to investigate the effects of a variety of parameters on the characteristics of the PD signal. A non-intrusive CM technique was designed for the detection of PD activity within cables. The CM technique was used to measure and analyse practical PD data. Two MATLAB¯ programs were designed to analyse the PD data in both the time-domain and frequency-domain.
No takes yet. Share an insight, caveat, or question.
Jaarsveldt et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: