Answers are grounded in this paper and cite their sources.
Vanadis 4 Extra SuperClean, a high-carbon cold-work tool steel, was processed by Electron Beam Melting (EBM) and subsequently subjected to standard heat treatment and two different duplex surface treatments combining plasma nitriding and PECVD Ti(C, N) coating, with or without an intermediate grinding step. The aim was to investigate the improvement of the surface-related properties in view of the application for the production of metallic powder compaction tools. The heat-treated microstructure consists of tempered martensite with primary MC and secondary. After surface treatment, the microstructure consists of a diffusion layer in the nitrogen-enriched surfaces and the Ti(C, N) coating; the bulk microstructure is still tempered martensite with carbides. Both heat-treated and surface-treated specimens exhibited high bulk hardness (∼64 HRc), high tempering resistance and high compressive strength (σy ≈ 3000 MPa). Duplex-treated samples achieved surface microhardness values up to 1100 HV₀.₀₂₅, compared to 850 HV₀.₀₂₅ for the heat-treated condition. The duplex surface treatment improves fatigue resistance by about 20%, particularly at low stress amplitudes, and reduces impact strength. Coating delamination was observed in the sample subjected to slight nitriding and PECVD, due to destabilisation of the nitrided white layer during the PECVD process. This issue was not observed in the sample that underwent intense nitriding, where a surface grinding step was introduced prior to coating, resulting in acceptable adhesion of the Ti(C, N) layer.
No takes yet. Share an insight, caveat, or question.
Tekin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: