Answers are grounded in this paper and cite their sources.
We monitored the dynamic responses of the blankets in the full-scale floc blanket clarifiers at PingTsan Water Works with dosed polyaluminium chloride (PACI) subjected to step-changes. With the raw water turbidity ranging 7-13 NTU, the sudden drop in PAC1 dose from 1.86 to 0.95 ppm as Al in conventional coagulation-clarification process led to a wave-like spatial instability in distributions of both solids fraction and floc size of the blanket. Adding a pre-coagulation and pre-sedimentation prior to the conventional stage (two-stage process) produced rather stable blanket that was only mildly deteriorated at insufficient coagulant dose. Jar tests with single or two-stage coagulation-sedimentation revealed that the organic matter readily interacted with dosed P ACI and might be responsible for the observed blanket structure deterioration. Dynamic flocculation tests using smallangle light scattering technique support this speculation. Linear stability analysis was conducted to demonstrate the blanket stability at infinitesimal process parameter change. The blanket would become linearly unstable at an upflow velocity exceeding a threshold value. Two-stage process produced large floes, which exhibit high settling velocity, hence stabilizing the blanket clarification process.
No takes yet. Share an insight, caveat, or question.
Sung et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: