Answers are grounded in this paper and cite their sources.
It was found that one of the degradation factors for crystalline Si photovoltaic (PV) modules is chemical corrosion of electrodes by acetic acid. Acetic acid is generated by hydrolysis reaction between water vapor and ethylene vinyl acetate (EVA) used as encapsulant. Therefore it is possible that residual acetic acid inside the modules is a measure for degradation. Acetate-ion concentration inside the module was measured by ion chromatography for both the modules after damp-heat (DH) test and those exposed outside for long time. By comparing acetate-ion concentration for both modules, it was found that DH test for 4000 h is almost equivalent to outside exposure for about 30 years.
No takes yet. Share an insight, caveat, or question.
Masuda et al. (2014) studied this question.