Answers are grounded in this paper and cite their sources.
Three-dimensional (3D) porous scaffolds made of biopolymers have attracted significant attention in tissue engineering applications. In this study, cellulose-nanofibers/polyethylene glycol diacrylate (CNFs/PEGDA) mixture, a novelty 3D material, was prepared by physical mixing the CNFs with a waterborne photopolymerizable acrylic resin (PEGDA). Then the CNFs/PEGDA mixture was used to fabricate 3D cytocompatibility CNFs/PEGDA hydrogel scaffold by stereolithograph(SLA)process. The CNFs/PEGDA hydrogels were shaped by SLA, and then the aerogel scaffolds were prepared by the freeze-drying of hydrogels. The results showed that the CNFs/PEGDA mixtures with different CNFs contents are all transparent, homogeneous and with obvious shear-thinning property. The SLA fabricated CNFs/PEGDA aerogel scaffolds possess high and tunable compressive modulus and high porosity of approximately 90%. It is found that CNFs in the composite scaffolds played a significant role in structural shape integrity, porous structure and mechanical strength. In addition, the NIH 3T3 cells tightly adhere on the CNFs/PEGDA materials and spread on the scaffolds with good differentiation and viability. These results have revealed a superior method to prepare tissue engineering scaffolds which possesses suitable mechanical strength and biocompatibility for 3D cell cultivation.
No takes yet. Share an insight, caveat, or question.
Tang et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: