Answers are grounded in this paper and cite their sources.
Recent reliability studies from 2025 indicate that power semiconductor modules remain the most critical failure point in inverters, accounting for approximately 38% of total system failures. The increase in power density and reduction in system volume are common requirements, especially in the automotive sector, targeting 200 kW/L by 2030, which increases thermal stress and requires advanced nonintrusive state-of-health (SOH) monitoring. Conventional electrical-based indicators are often limited by high switching noise and inherent temperature dependence, which can lead to inaccurate aging estimation if proper thermal compensation is not applied, and by the complexity of on-board conditioning circuits. This article proposes a novel method for IGBT aging characterization based only on junction (Tj) and case (Tc) temperature monitoring. The proposed approach consists of simulating the power losses and thermal behavior of a power transistor under various predefined aging conditions. These simulations provide the Tj and Tc for each aging state, which are then correlated with conventional aging indicators, such as the on-state conduction resistance and the junction-to-case thermal resistance. This unique approach enables decoupling of conduction-related degradation mechanisms (Mcon) from thermal-path degradation mechanisms (Mth). Experimental validation of power modules demonstrates that the proposed method accurately tracks SOH using conventional indicators, such as conduction and thermal resistances, with errors of 0.1%–1.5% over most of the device's operational life.
No takes yet. Share an insight, caveat, or question.
Perez-Farre et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: