Answers are grounded in this paper and cite their sources.
Materials study reveals material-dependent PTFE binder optimization in dry-process electrodes, indicating superior rate capability and cycling stability in lithium-ion capacitors.
Solvent-free dry electrode processing offers a promising route for lithium-ion capacitor (LIC) manufacturing, but the optimal design of polytetrafluoroethylene (PTFE)-fibrillated binder networks depends strongly on electrode material characteristics. Herein, dry-process soft carbon (SC), graphite, and activated carbon (AC) electrodes were fabricated through jet-milling-assisted PTFE fibrillation and roll pressing. The effects of PTFE content on film processability, electrochemical behavior, interfacial evolution, and full-cell performance were systematically investigated. For the battery-type anodes, 3 wt% PTFE provided the most favorable balance between electrode cohesion and electrochemical accessibility. The optimized SC and graphite electrodes deliver specific capacities of 258 mAh g⁻¹ for SC and 370 mAh g⁻¹ for graphite at 0.05 A g⁻¹. The capacitive AC cathode with 5 wt% PTFE delivered 58 mAh g⁻¹ and exhibited favorable rate behavior. Insufficient PTFE resulted in weak particle connection, whereas excessive PTFE was associated with reduced electrolyte accessibility and increased polarization. Although the graphite electrode provided a higher half-cell capacity, the AC-5%PTFE//SC-3%PTFE LIC exhibited better rate capability and retained 94.3% of its capacity after 2500 cycles at 5 C. These results demonstrate that material-dependent PTFE-content optimization is essential for improving electrode compatibility and full-cell performance in LICs.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: