Answers are grounded in this paper and cite their sources.
Material evaluation demonstrates enhanced mechanical bonding in reed-fiber composites, indicating a low-impact alternative to urea-formaldehyde resins.
Practical biomass adhesives for fiber composites require low-viscosity processability, efficient curing, and durable bonding. Inspired by the sequential association and stabilization of collagen, a tannic acid-based adhesive was developed through staged pre-curing association followed by thermally induced network development. Tannic acid (TA), a citric acid-glucose prepolymer (CABP), and an amine-terminated hyperbranched polymer/glutaraldehyde composite (HBPA/GA) supplied phenolic hydroxyl, hydroxyl/carboxyl, and amino-containing sites, respectively, while HBPA/GA regulated the uncured colloidal state. Spectroscopic, colloidal, and rheological analyses indicated formulation-dependent hydrogen bonding, ionic association, and colloidal aggregation before hot pressing, together with changes in ester- and amide-containing chemical environments during curing. Under the investigated curing condition, the HBPA/GA-containing formulation exhibited a higher gel fraction, lower equilibrium swelling, and more pronounced viscoelastic network development than the TA@CABP control. Reed-fiber composites prepared at 140 ℃ for 15 min achieved a flexural strength of 63 MPa, a flexural modulus of 10.31 GPa, an internal bond strength of 0.60 MPa, a tensile strength of 62 MPa, and a 24 h thickness swelling of 14.87%. Relative to the TA@CABP control, the mean flexural and internal bond strengths increased by 103% and 140%, respectively. At 60 wt% solids, viscosity increased from 241 to 832 mPa·s after 30 days at room temperature. Dilution to 15 wt% solids improved short-term handling, although extended storage reduced post-storage panel performance. A cradle-to-gate assessment indicated generally lower modeled environmental impacts than urea-formaldehyde resin. Overall, this processing-oriented strategy provides a basis for developing high-performance reed-fiber composites for interior products, construction materials, packaging, and transportation components.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: