Answers are grounded in this paper and cite their sources.
Computational simulation demonstrates ample thermomechanical and fatigue margins in plasma-facing components, indicating bulk neutron displacement governs component replacement schedules.
The plasma-facing components (PFCs) of a compact breeder live simultaneously inside a hard 14 MeV neutron field, a cyclic surface heat load, and a demount–remate maintenance duty; the engineering question is not whether the wall is loaded but which mechanism sets its life. We pose the coupled thermomechanical, radiation-damage and fatigue problem for the Hyperion breeder at its frozen design point (P_ fus=85.04 MW, I_p=9.66 MA, Q=3.076, negative triangularity δ=-0.30, first-wall neutron loading _ w=1.885 MW m^-2) and solve each failure mode from its governing equations. We write the conjugate heat-transfer problem with a combined Neumann surface flux and a volumetric nuclear source and a Robin coolant condition; the thermoelastic stress from constrained thermal expansion; the Norgett–Robinson–Torrens (NRT) and athermal-recombination-corrected displacement model folded against the primary-knock-on spectrum; helium-bubble rate theory closed by a van der Waals equation of state; and the Coffin–Manson–Basquin strain–life law with Palmgren–Miner accumulation. Solved on the NVIDIA GPU high-performance-computing (HPC) campaign with OpenMC/DAGMC transport-and-depletion, LAMMPS molecular-dynamics cascades, RustBCA binary-collision sputtering, and a finite-element conjugate-heat-transfer solver, the results are unambiguous. Every mechanical and materials mode carries margin: tungsten plasma-facing swelling is 0.024 % per full-power year (fpy) and reduced-activation ferritic–martensitic (RAFM) swelling 0.017 %/fpy against a 1–5 % tolerance; the cumulative Palmgren–Miner fatigue damage from pulsed operation is 3×10^-6; the demountable-joint fatigue life is 1.09×10^6 cycles, 5434× the 200-mate design duty; the self-cooled lithium first wall runs at a RAFM structural temperature of 516 with a 34 margin, contingent on a 6 mm channel depth. What binds is bulk neutron displacement damage: the wall accumulates 18.85 dpa fpy^-1, which sets a scheduled-replacement cadence rather than a thermomechanical failure. The lifetime case is therefore clean and legible — fatigue and swelling sit orders of magnitude inside their limits — and the single design driver is a plannable, damage-limited replacement interval sized by a first-principles calculation. Key results (frozen anchors): s = 0 eq; N_b = 2.3 ×10^23; D = 3 ×10^-6; N_f = 1.09 ×10^6. Methods & codes: OpenMC, DAGMC, ENDF/B-VIII.0, Sauter. Live verification: 3 gate validator(s) with live-recompute cards (2 reproduced, 1 revised). See the Verification section and data/verification.csv. Related: Paper page · De-risking register · 3D model · Learn more about Kronos Part of the 2026 Kronos publication series; independently re-run and stamped in the Kronos de-risking register (DOI 10.5281/zenodo.22645689). All numerical values are frozen design-point anchors; see the register. Public research artifact. No proprietary, financial, or supply-chain information is included.
No takes yet. Share an insight, caveat, or question.
Priyanca Ford (2026) studied this question.