Answers are grounded in this paper and cite their sources.
Controlled experiment demonstrates high sensible cooling power in 3D-printed gyroid ceramic screens, indicating strong potential for water-assisted passive facades in arid climates.
Urban overheating demands innovative passive cooling strategies integrated into building envelopes. While 3D-printed ceramics offer unprecedented geometric control for architectural applications, their evaporative cooling potential under forced convection remains under-characterized. This study provides a rigorous baseline assessment of the evaporative cooling performance of 3D-printed ceramic screens based on Triply Periodic Minimal Surfaces (TPMS) geometries. Six configurations—combining two ceramic materials, two TPMS topologies (Gyroid and Schwarz-P), and specific density levels—were experimentally tested in a wind tunnel coupled with an environmental chamber. The dynamic airflow assessment spanned eleven psychrometric scenarios, evaluating both steady-state and transient conditions typical of summer thermal loads in southern Spain. Results indicate that Gyroid based screens (Y-Gyr-2) reached a maximum sensible cooling power of 11,794 W/m 2 , outperforming Schwarz-P (Y-Sch-1) by 26.5% due to its lower aerodynamic resistance and its higher evaporative area. While these controlled wind-tunnel tests do not account for real-world variables such as direct solar radiation or outdoor wind turbulence, they isolate the precise impact of 3D-printed macro-porosity on convective heat and mass transfer. The findings provide critical benchmark data for the future computational modelling and optimization of water-assisted passive cooling facades in hot and arid climates.
No takes yet. Share an insight, caveat, or question.
Adriano et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: