Answers are grounded in this paper and cite their sources.
Computational modeling reveals a safe operating envelope for a negative-triangularity spherical tokamak, indicating high-density margins against disruptive limits.
A fusion power plant lives inside a bounded operating window, and the density limit is one of its walls. We pose the operating-window boundary of the Hyperion breeder — a compact negative-triangularity spherical tokamak (I_p=9.66 MA, =1.20 m, aspect ratio A=2.5, minor radius a=0.48 m, elongation κ=2.0, triangularity δ=-0.30, B_0=8 T) — as a formal feasibility problem and map its density axis. From the geometry the Greenwald density is =I_p/( a^2)=1.33×10^21 m^-3; the design point operates at a Greenwald fraction ≈0.35, a line-averaged density n_e≈4.7×10^20 m^-3 and a density headroom of a factor 2.9 below the empirical limit. We derive the four walls of the window — the Greenwald/radiative density boundary, the ideal-MHD β limit, the scrape-off-layer detachment boundary and the radiative-collapse floor — as explicit inequalities, and we solve the enclosed feasible set on a nine-point corner grid: the fusion gain holds a window Q=2.735–3.460 (P_ fus=58.6–118.9 MW) with every physics gate satisfied, enclosing the frozen design point Q=3.076, P_ fus=85.04 MW. Because the geometry is fixed the neutron source strength and the first-wall loading are a strict one-to-one invariant, so density is a controllable lever inside the window (Q=3.865 at 0.967× the reference wall loading) rather than a cliff. Edge-transport solves place the high-density boundary at divertor detachment access near 0.6 — reached with a sub-one-percent nitrogen seed that dissipates 94% of the exhaust power and holds the target heat flux within the plasma-facing-component limit — well above the operating point, so the practical ceiling is a controlled radiative boundary and not a disruptive one. All quantitative results are frozen anchors reproduced on an NVIDIA GPU HPC campaign spanning a reduced-order transport engine, the UEDGE and SD1D/BOUT++ edge codes and the SOLPS-ITER reference edge code. The result is a quantified, gate-by-gate safe-operating envelope with a wide density margin on the design point. Key results (frozen anchors): n_e = 4.7 ×10^20; fus = 85.04 MW; k = 1 ,K\; mathrmm^-3 = 1.33 ×10^21\; Q_ = 1 eq; fus^ = 85.04 MW. Methods & codes: FreeGS, CGYRO, OpenMC, SOLPS-ITER, SOLPS, EIRENE, Sauter. Live verification: 4 gate validator(s) with live-recompute cards (3 reproduced, 1 estimated). See the Verification section and data/verification.csv. Related: Paper page · De-risking register · 3D model · Learn more about Kronos Part of the 2026 Kronos publication series; independently re-run and stamped in the Kronos de-risking register (DOI 10.5281/zenodo.22645689). All numerical values are frozen design-point anchors; see the register. Public research artifact. No proprietary, financial, or supply-chain information is included.
No takes yet. Share an insight, caveat, or question.
Ford et al. (2026) studied this question.