Answers are grounded in this paper and cite their sources.
Computational modeling study demonstrates structural viability and quench protection margins in a 26.49 T REBCO plug coil, indicating high-field tandem-mirror feasibility.
The pacing subsystem of the Kronos D–^3He tandem-mirror burner is the high-field plug coil that electrostatically confines the central-cell ions, and this paper qualifies it as a buildable no-insulation (NI) REBCO magnet at its canonical peak field of 26.49 T. We pose the qualification as three coupled engineering problems — can the structure carry the magnetic load, can the conductor survive its own hoop stress, and can a quench be detected and dumped before the winding overheats — and we solve each from first principles, carrying the tightest quantity from a conservative analytic screen through a real-CAD three-dimensional finite-element (FE) closure. At 26.49 T the Maxwell magnetic pressure is p_ mag=B^2/2_0=279 MPa; a thick-wall Lam\'e sizing at a 0.85 m structural bore returns a required overwrap of 0.48 m to bring the bore hoop stress to the 667 MPa allowable, and a reconciling three-dimensional FE model returns a peak stress of 440 MPa, a utilization of 0.66 (1.5× margin) that persists to a 30 T program-coil check. The one tight quantity on a conservative thin-wall estimate was the conductor hoop stress, ~814 MPa at 26.49 T for a margin factor of 0.86 against a ~700 MPa reinforced allowable; a full three-dimensional FE analysis on the real coil CAD closes it to 1.34×, with the REBCO strain reaching a 2.85–3.54× margin under a graded radial preload and the plug dimensions unchanged. Quench protection is sized by an adiabatic hot-spot (MIITs) integral: the copper-stabilized composite has a 150 K load integral (150 K)≈ 1.5×10^17 A^2 s m^-4, inside which a 4 s detect-and-dump at a 100 A mm^-2 stabilizer current density (tightening to 1.9 s at 200 A mm^-2) keeps the hot spot below 150 K. The 17 T mirror throat is never the binding constraint. Throughout, the burner plug (26.49 T) and the breeder centrepost (16.84 T) are kept rigorously separate as the two distinct devices they are. The plug coil is a structurally sound, protectable, buildable high-field magnet. Key results (frozen anchors): mu_0 = 279 MPa; f_n = 5.44 %; mag = 115 MPa; sigma_r = 0 eq; all = 667 MPa; cond = 814 MPa. Live verification: 3 gate validator(s) with live-recompute cards (2 reproduced, 1 revised). See the Verification section and data/verification.csv. Related: Paper page · De-risking register · 3D model · Learn more about Kronos Part of the 2026 Kronos publication series; independently re-run and stamped in the Kronos de-risking register (DOI 10.5281/zenodo.22645689). All numerical values are frozen design-point anchors; see the register. Public research artifact. No proprietary, financial, or supply-chain information is included.
No takes yet. Share an insight, caveat, or question.
Ford et al. (2026) studied this question.