Answers are grounded in this paper and cite their sources.
This study presents the results from in-well hydraulic fracture monitoring within a horizontal well in an unconventional reservoir utilizing Distributed Fiber Optic Sensing (DFOS). An in-house-developed Brillouin-based Distributed Strain Sensing (DSS) interrogator was deployed to obtain strain measurements, complemented by a commercial Raman-based Distributed Temperature Sensing (DTS) interrogator for temperature measurements and a commercial Rayleigh-based Low-Frequency Distributed Acoustic Sensing (LF-DAS) interrogator for strain-rate measurements. Examined over a ten-day period, the spatio-temporal distribution of temperature-compensated strain obtained from DSS and DTS revealed distinct signatures of the multi-stage hydraulic fracturing process. These signatures were analyzed with respect to fracture width growth and closure, residual strain effects, and fracture conductivity near the wellbore. Fracture widths within the fracture zone were estimated for individual stages. The findings were assessed with LF-DAS measurements for further evaluation. This work integrates DFOS-measured strain, temperature, and strain-rate data for monitoring in-well hydraulic fracturing, with the goal of supporting future studies in interpreting DFOS measurements for improved understanding of hydraulic fracturing in unconventional reservoirs. • Three different distributed fiber optic sensing (DFOS) systems deployed simultaneously. • Cross-interpretations of strain, temperature, and strain-rate from the same well. • Residual strains and relation to fracture fluid communication with prior stages. • Fracture width estimation using temperature-compensated strain. • Detailed case study laying groundwork for interpreting DFOS data for in-well monitoring.
No takes yet. Share an insight, caveat, or question.
Saw et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: