Answers are grounded in this paper and cite their sources.
18CrNiMo7-6 carburized steel is extensively used in high-load transmission components owing to its superior strength and toughness. Nevertheless, balancing machining efficiency with surface quality when processing high-hardness materials remains challenging. To overcome this limitation, Radial high-speed ultrasonic vibration cutting (R-HUVC) has been proposed as a hybrid machining approach to improve both the cutting performance and surface characteristics. A finite element model incorporating the gradient properties of the carburized layer was developed to analyze the multiphysics evolution during the R-HUVC process. The results demonstrate that high-frequency radial vibration dynamically modifies the tool–workpiece contact condition, reducing the cutting force and temperature by 13.8% and 9.03%, respectively, compared with conventional cutting (CC). Simultaneously, the vibration-induced impact and ironing effects enhanced the plastic deformation of the material, leading to a significant increase in the equivalent stress and plastic strain. Furthermore, the simulation results were validated through cutting experiments on 18CrNiMo7-6 carburized steel. The results demonstrated that under R-HUVC conditions, the thrust force decreased by as much as 34.6%, accompanied by a 13.34% reduction in the cutting temperature. Analysis of surface integrity indicates that R-HUVC enhanced the subsurface deformation zone and increased compressive residual stress (up to -1460.5 MPa, representing a 39.1% improvement over CC). In addition, a more desirable microhardness gradient was obtained. These strengthening effects primarily stem from the ironing-impact coupling mechanism introduced by the ultrasonic vibration. This study elucidates the surface modification mechanism of the material under R-HUVC conditions from a multi-scale perspective, providing a new approach for achieving "cutting-strengthening integration" in the machining of carburized steel and offering a theoretical basis for the active regulation of surface integrity tailored for service performance.
No takes yet. Share an insight, caveat, or question.
Peng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: