Compressor Blade Boundary Layers: Part 2—Measurements With Incident Wakes

This paper follows directly from Part 1 by the same authors and describes measurements of the boundary layer on a supercritical-type compressor blade with wakes from a simulated moving upstream blade row convected through the passage. (The blades and the test facilities together with the background are described in Part 1). The results obtained with the wakes are compared to those with none for both low and high levels of inlet turbulence. The transition process and boundary layer development are very different in each case, though the overall momentum thickness at the trailing edge is fairly similar. None of the models for transition is satisfactory when this is initiated by moving wakes.