Answers are grounded in this paper and cite their sources.
This paper investigates the effect of transfer films on friction coefficient of polytetrafluoroethylene (PTFE)/polyetheretherketone (PEEK) composite. Friction experiments were carried out first to investigate transfer-film development during sliding contact of PTFE/PEEK composite with different PTFE volume fractions on a steel counterface. Quantitative relationships between PTFE/PEEK composite friction coefficient and constituent material mechanical properties are then established to facilitate the subsequent investigation of friction mechanisms and influence of transfer films on the composite friction. A micromechanics-based friction theory is developed for predicting PTFE/PEEK composite friction coefficient. The effect of transfer films on composite friction is accounted for based on two distinctly different mechanisms—one with solid-state film lubrication and the other with PTFE as a solid-state lubricant on the top surface of transfer films. The friction theory is first validated through the excellent agreement obtained between the theoretical predictions and the in-house experimental results on PTFE/PEEK composite with up to 20% PTFE (by volume). The validity of the theory is further demonstrated by comparing the theoretical predictions with the test data reported by other researchers in the literature.
No takes yet. Share an insight, caveat, or question.
Qu et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: