Answers are grounded in this paper and cite their sources.
The purpose of this study was to examine the dependence of the friction-wear characteristics of artificial joints on contact pressure. Test specimens used were ultra-high molecular weight polyethylene (UHMWPE), Co-Cr-Mo alloy and alumina ceramics in the materials of artificial joints. Lubricating liquid was a water-based liquid that contained the principal constituents of synovial fluid. The wear of UHMWPE sliding against Co-Cr-Mo alloy and alumina ceramics decreased with the increase of contact pressure and indicated dependence on contact pressure. Surface roughness on the rubbed area of Co-Cr-Mo alloy and alumina ceramic discs had a tendency to decrease with the increase of contact pressure. Therefore, it was considered that the dependence on contact pressure was effected by the decrease of surface roughness on the rubbed area of the discs.
No takes yet. Share an insight, caveat, or question.
OTSUKA et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: