Answers are grounded in this paper and cite their sources.
In this study, the translaminar fracture toughness and the corresponding cohesive law of an additively manufactured polymer composite reinforced with continuous carbon fibres (c-CFRP) were characterised using double-tapered compact tension (2TCT) cross-ply specimens. The 2TCT geometry was determined through a parametric study to prevent undesired failure modes. Fracture toughness and cohesive law identification were performed by applying the inverse method to the experimental data. Subsequently, the resulting cohesive laws were fitted to a general bi-linear form. The results indicate a mean translaminar fracture toughness of 17.4 N/mm for the tested 0/90 cross-ply coupons. The fracture toughness associated with the tensile failure of the 0° ply was estimated using a rule-of-mixtures approach, yielding a value of 33.1 N/mm. Post-mortem micrographic and X-ray analyses revealed fibre pull-outs on the fracture surface and confirmed the absence of additional damage, thereby validating the suitability of the 2TCT geometry for translaminar fracture toughness characterisation of 3D-printed c-CFRP composites. These findings contribute to improving the accuracy of numerical models for predicting fibre failure of additively manufactured composites.
No takes yet. Share an insight, caveat, or question.
Fernández et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: