This is the authors' abstract. We don't add key points for this paper.
A diamond film with a size of 6 × 6 × 0.5 mm 3 is fabricated by electron-assisted chemical vapor deposition. Raman spectrum analysis, x-ray diffraction and scanning electron microscope images confirm the high purity and large grain size, which is larger than 300 μ m. Its resistivity is higher than 10 12 Ω ⋅ c m . Interlaced-finger electrodes are imprinted onto the diamond film to develop an x-ray detector. Ohmic contact is confirmed by checking the linearity of its current–voltage curve. The dark current is lower than 0.1 nA under an electric field of 30 kV cm −1 . The time response is 220 ps. The sensitivity is about 125 mA W −1 under a biasing voltage of 100 V. A good linear radiation dose rate is also confirmed. This diamond detector is used to measure x-ray on a Z-pinch, which has a double-layer ‘nested tungsten wire array’. The pronounced peaks in the measured waveform clearly characterize the x-ray bursts, which proves the performance of this diamond detector.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Xu et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: