Answers are grounded in this paper and cite their sources.
The effect of the Mo addition on the high temperature creep properties of the 9Cr-3W steel was also evaluated. Two experimental steels, (9Cr-3W and 9Cr-3W-0.5Mo), were prepared using a vacuum induction melting process, followed by hot rolling and heat treatment processes. Three types of precipitates, ( M₂₃C₆ , Nb-rich MX and V-rich MX) were observed in a typical tempered martensitic matrix. Significant effects of the Mo addition on the tensile properties were not observed. However, the creep properties at 650∘C under applied stresses of 140 and 150 MPa were considerably enhanced by the Mo addition. The microstructural observation after the creep test indicated that the addition of Mo could function to retain the recovery of the martensitic matrix, thus resulting in the enhanced creep properties of the 9Cr-3W-0.5Mo steel. Furthermore coarsening of the M₂₃C₆ carbides and formation of Laves phases were observed in both samples after the creep tests.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: