Answers are grounded in this paper and cite their sources.
Macroporous gels were prepared by solution crosslinking of butyl rubber (PIB) in frozen benzene solutions using sulfur monochloride (S 2 Cl 2 ) as a crosslinking agent. The effect of different preparation conditions, including the crosslinker concentration and the gel preparation temperature, on the gel properties was investigated. S 2 Cl 2 was found to be an efficient crosslinking agent even at very low reaction temperatures up to −22 °C and at crosslinker ratios down to about 0.9 mol S 2 Cl 2 /mol internal vinyl group on PIB. The gels prepared from frozen solutions of PIB contain about 97% organic liquid, and they are very tough; they can be compressed up to about 100% strain without any crack development, during which the total liquid inside the gel is removed. Further, the compressed gel immediately swells in contact with good solvents to recover its original shape. The low-temperature gels have a porous structure with irregular large pores of 10 1 −10 2 μm in diameter, separated by pore walls of about 10 μm in width with a high polymer concentration, which provide structural support to the material. The gels also exhibit completely reversible swelling−deswelling cycles in toluene and methanol, respectively, i.e., they return to their original shape and original mass after a short reswelling period. The results suggest that both phase separation of PIB chains at low temperatures and the presence of frozen benzene templates are responsible for the porosity formation in PIB gels.
No takes yet. Share an insight, caveat, or question.
Ceylan et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: