Answers are grounded in this paper and cite their sources.
This paper examines the influence of track overlap value during friction stir processing (FSP) on the microstructure and properties of a busbar made of AD31T aluminium alloy. In particular, the influence of 6 parallel tracks with an overlap of 10 mm and 5 mm on the formation of structure and volumetric defects in the volume of the stir zone was studied. It has been shown that carrying out FSP at a tool rotation speed of 1120 rpm and a linear tool speed of 200 mm/min ensures the absence of macroscopic defects in the volume of the treated area in both cases. Reducing the amount of overlap to 5 mm made it possible to achieve the formation of a homogeneous structure and the absence of untreated zones. This type of processing, with given tool geometry and FSP regimes, can be recommended as a method for processing the surface and subsurface layer of aluminium alloys to increase their hardness without significant loss of their electrical conductivity.
No takes yet. Share an insight, caveat, or question.
Medvedev et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: