Answers are grounded in this paper and cite their sources.
The present study uses a two-phase Eulerian-Eulerian solver to investigate flow dynamics and heat transfer in a differentially heated cavity with water or gallium-based Al2O3/Cu hybrid nanofluids. In contrast to the single-phase approach, this method solves the equations for each phase individually, and coupling is done through interaction forces and heat exchange between the phases. The governing equations are solved using finite difference techniques with sixth-order accuracy compact schemes employed for nonlinear terms. After validating the numerical solver with published works, the effects of Grashof number (103 ≤ Gr ≤106), volume fraction (1% ≤ φs ≤ 3% ), and nanoparticle mixture ratios are examined on flow dynamics and heat transfer. The findings indicate that water-based hybrid nanofluids provide higher heat transfer over water. At Gr = 105 and φs = 2%, using a mixture ratio of 20:80 (Al2O3:Cu) hybrid nanofluid, there is a 20.58% enhancement in heat transfer than water case. Similarly, the gallium-based hybrid nanofluid provides 14.8% greater heat transfer than gallium. However, the hybrid nanofluid with gallium as base fluid exhibits better heat transfer capabilities than water. At Gr = 105 and φs = 2%, using a mixture ratio of 20:80 (Al2O3:Cu), gallium-based hybrid nanofluid provides 7.73 times higher heat transfer than the water-based hybrid nanofluid. Comparatively, varying Grashof number and volume fraction strongly affects the heat transfer using water as the base liquid compared to gallium since gallium’s high thermal conductivity minimizes their influence. Finally, average Nusselt number correlations are proposed with water-based and gallium-based hybrid nanofluids inside a square cavity.
No takes yet. Share an insight, caveat, or question.
Koneti et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: