Answers are grounded in this paper and cite their sources.
Gate dielectricplays an integral role in advancing the performance and reliability of GaN-based transistors. Si-alloying of aluminum oxide (Al2O3) dielectrics have been shown to provide a promising route to improve gate dielectric properties in GaN. In this letter, we report on the first demonstration of a GaN FET with aluminum silicon oxide (AlSiO) as the gate dielectric. Vertical normally-off GaN MOSFETs were fabricated on bulk GaN substrate. Excellent dc performance was achieved with a breakdown voltage of 1.2 kV, an on-resistance of 2 mΩ.cm2, and a threshold voltage of 1.5 V (defined at IDS= 1 μA/mm). A high breakdown electric-field of 2.3 MV/cm was calculated in these devices. In addition to vertical GaN MOSFET results, a comparative study of Al2O3and AlSiO-based in situ GaN MOS capacitors, including time-dependent dielectric breakdown characteristics is also presented.
No takes yet. Share an insight, caveat, or question.
Gupta et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: