Answers are grounded in this paper and cite their sources.
A central aim in fault mechanics is to understand the microphysical mechanisms controlling -seismic transitions in fault gouges, and to identify microstructural indicators for such . We present new data on the slip stability of calcite fault gouges, and on microstructural down to the nanometer scale. Our experiments consisted of direct tests performed dry at slip rates of 0.1–10 μm/s, at a constant normal stress of 50 MPa, 18–150 °C. The results show a transition from stable to (potentially) unstable slip above ~80 °C. All samples recovered showed an optical microstructure characterized by narrow, 30–40-μm-wide, Riedel and boundary shear bands marked by extreme grain comminution, a crystallographic preferred orientation (CPO). Boundary shear bands, sectioned using -SEM (focused ion beam scanning electron microscopy), revealed angular grain fragments from 10 to 20 μm at the outer margins to ~0.3 μm in the shear band core, where aggregates of nanograins also occurred. Transmission electron microscopy, applied to extracted from boundary shears using FIB-SEM, combined with the optical CPO, showed these aggregates consist of calcite nanocrystals, 5–20 nm in size, with the (104)[201] dislocation system oriented parallel to the shear plane and direction. Our results suggest the mechanisms controlling slip include cataclasis and localized crystal plasticity. Because plasticity is strongly thermally activated, we infer that the transition to velocity-weakening is likely due to enhanced crystal plasticity at >80 °C. This implies that tectonically limestone terrains will tend to be particularly prone to shallow-focus seismicity.
No takes yet. Share an insight, caveat, or question.
Verberne et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: