Answers are grounded in this paper and cite their sources.
This article reports the fabrication process of a carbon-nanotube (CNT) field-emitter array with the silicon-ladder polymer insulator polyphenylsilsesquioxane (PPSQ), whose feature is heat resistance, high breakdown voltage, and low outgassing. CNT islands are formed with a screen-printing method, polymer-insulator coating is carried out (8 μm in thickness), and the gate electrodes are deposited, followed by patterning of the electrodes. PPSQ insulator is applied reactive ion etching (RIE) to reveal CNT emitters. Because of using mixed gases of CF4 and O2, the etching rate for CNT is half that for PPSQ, there is a margin to stop etching with enough CNT left. After reactive ion etching, emission-current density from the revealed CNT is degraded, so laser activation treatment is applied and the emission current density is boosted by a hundredfold. In the case of the triode mode, the laser condition was chosen to prevent gate damage and to improve emission characteristics. Current density of 3 mA/cm2 is obtained at the driving voltage of 35 V.
No takes yet. Share an insight, caveat, or question.
Nishimura et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: