Answers are grounded in this paper and cite their sources.
This study focuses on developing solvent-free polymer electrolytes for solid-state lithium-ion batteries intended to replace conventional liquid systems. The materials consist of a polysulfone (PSU) backbone chemically bonded to pendant polyetheramine (Jeffamine®) chains and lithium salt. The synthesis consists of four key steps: sulfonation of PSU to obtain PSU-SO 3 Na (40% and 60% sulfonation), conversion of these groups into sulfonyl chlorides (PSU-SO 2 Cl), nucleophilic substitution with Jeffamine® M − 2070 to form PSU-Jeff copolymers (40% and 60%), and finally incorporation of LiTFSI as the conducting salt to produce PSU-Jeff-LiTFSI with an O/Li ratio of 20. The conducting copolymers obtained in this way do not require solvents for their use as electrolytes, and their semi-solid gel-like appearance facilitates effective contact with the electrodes. Structural and morphological analyses were performed using 1 H NMR and SEM/EDS, while thermal behavior was examined via DSC. Both electrolytes exhibit ionic conductivity ranging from 10 −2 to 10 −1 mS cm −1 in the temperature range of 10-80 °C, and show oxidative stability above 3.9 V and 4.2 V vs. Li + /Li, for PSU-Jeff40%-LiTFSI and PSU-Jeff60%-LiTFSI, respectively. Preliminary electrochemical evaluation in LiFePO 4 |Li cells demonstrated the feasibility of employing the synthesized PSU-Jeff-LiTFSI systems as solvent-free polymer electrolytes, although further optimization of electrode/electrolyte interfaces and electrochemical performance under practical operating conditions will be required.
No takes yet. Share an insight, caveat, or question.
Swaby et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: