Answers are grounded in this paper and cite their sources.
Experimental evaluation reveals that welding flux slag partially replaces Portland cement while meeting standard strength grades, highlighting viable clinker reduction.
Welding flux slag (WFS) is a waste product from the submerged arc welding industry, typically disposed of in landfills. The reuse of WFS aligns with circular economy strategies and contributes to reducing landfill volumes. This work evaluates the feasibility of incorporating WFS as a partial Portland cement replacement at levels of 6% and 35%. The mechanical properties, durability against acid attack and carbonation, eco-efficiency, and cost implications of WFS-incorporated cement were assessed following European standards. Results indicate that higher WFS contents led to increased porosity and reduced compressive strength, mainly due to lower C-S-H formation and changes in matrix densification. Even so, mortars with 6% WFS complied with the requirements for CEM II/A-S 42.5N, while those with 35% WFS still met the minimum strength class for CEM II/B-S 32.5N. Additionally, WFS-containing cement demonstrated improved resistance to sulfuric acid attack and promising long-term eco-efficiency performance. Thermogravimetric and isothermal calorimetry analyses provided insights into hydration kinetics and phase composition changes. Although WFS incorporation reduced early-age mechanical efficiency, the cement intensity values of all mixtures became practically equivalent at 91 days. Notably, the mixture containing 35% WFS achieved clinker consumption per unit of strength nearly identical to the reference mortar, despite replacing more than one-third of the clinker content. The findings demonstrate the technical feasibility of incorporating WFS as a partial cement replacement material, highlighting its strong potential for clinker reduction, industrial waste valorization, and landfill diversion with limited long-term mechanical performance loss. Further studies are recommended to better distinguish possible physicochemical contributions from filler effects.
No takes yet. Share an insight, caveat, or question.
Campos et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: