Answers are grounded in this paper and cite their sources.
Thermodynamic modeling demonstrates waste-heat recovery gains in an integrated fuel cell system, highlighting enhanced power output.
High-temperature proton-exchange membrane fuel cells (HT-PEMFCs) generate useful thermal energy that can be recovered for additional power production. This study investigates an integrated HT-PEMFC–organic Rankine cycle (ORC) system by combining response surface methodology (RSM) with thermodynamic energy analysis. A 17-run response-surface design was used to quantify the effects of pressure, temperature, and current density on polarization voltage. Power density was derived directly from the RSM-predicted voltage using Pd = iE to preserve physical consistency. The electrochemical model was benchmarked against published phosphoric-acid-doped polybenzimidazole HT-PEMFC polarization data under comparable conditions. The constrained optimization identified an operating condition of 400 kPa, 443 K, and approximately 1.198 A cm−2, giving a predicted voltage of 0.5395 V and a power density of approximately 0.6462 W cm−2. This represents a 12.9% increase in power density relative to the adopted reference condition. Separately, the reference thermodynamic case produced 13.08 kW of gross HT-PEMFC stack electrical power and 15.45 kW of thermal output assumed available to the ORC. The available legacy R409A reference case was evaluated at an evaporator pressure of 2 MPa, yielding approximately 1.24 kW of ORC net power and a net thermal efficiency of about 8.02%. The resulting combined modeled electrical output was approximately 14.32 kW before unmodeled balance-of-plant auxiliary power consumption, with the ORC contribution corresponding to about 9.5% of the gross HT-PEMFC stack output. The results demonstrate the complementary potential of physically consistent HT-PEMFC operating-condition optimization and waste-heat recovery, while the ORC results remain specific to the retained R409A reference dataset.
No takes yet. Share an insight, caveat, or question.
Albatati et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: