Answers are grounded in this paper and cite their sources.
Steel–concrete composite beams are widely used in buildings and bridges due to their high structural efficiency and cost-effectiveness. However, conventional design approaches often neglect interfacial slip, particularly in adhesively bonded non-symmetrical composite beams. This study presents a closed-form analytical model for predicting the interfacial slip and shear stress distribution in adhesively bonded steel–concrete composite beams strengthened with a composite plate. The formulation is based on strain compatibility and explicitly considers both continuous and discontinuous adhesive bonding conditions. The proposed solution is validated using finite element simulations and experimental results available in the literature. The analytical predictions show excellent agreement with numerical results, with a maximum deviation of 2%–4% for interface slip. Parametric investigations demonstrate that increasing the bonded area from 25% to 100% reduces interface slip by up to 70%–80%, while higher adhesive stiffness and the presence of web stiffeners significantly enhance composite action and reduce interfacial deformation. The results provide practical design insights for the strengthening and rehabilitation of steel structures using adhesive bonding, highlighting the importance of bonded area, material stiffness, and structural configuration on slip control. The proposed analytical model offers a simple and efficient tool for evaluating the serviceability performance of adhesively bonded steel–concrete composite beams.
No takes yet. Share an insight, caveat, or question.
Daouadji et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: