Answers are grounded in this paper and cite their sources.
Microalgal oil has emerged as a promising feedstock for biofuel production. However, crude algal oil (CAO) typically contains a relatively low fatty matter content (<25 wt%) and substantial levels of impurities, including metal and non-metal elements, polar lipids, carbohydrates, and proteins, which increase the difficulty of downstream refining. This study investigated the feasibility of aqueous acid washing as a pretreatment strategy to enhance the quality of CAO extracted from Nannochloropsis oculata ( N. oculata ) by enriching fatty matter and reducing a broad spectrum of organic and inorganic impurities. The effects of key process parameters were evaluated, and the optimum conditions were determined as 0.25 M sulphuric acid, a water-to-CAO ratio of 1:1, a temperature of 100 °C, and a reaction time of 4 h. Under these conditions, the fatty matter content increased from 30.96 wt% in the untreated CAO to 54.09 wt% after acid washing, representing a 1.75-fold enrichment. A total fatty matter recovery of 109% relative to the initial CAO was achieved, which was attributed to the partial conversion of polar lipid species into acylglycerols and free fatty acids during acid treatment. In addition, aqueous acid washing effectively reduced various impurity classes, including total polar lipids (62% reduction), total metals (95% reduction), organic impurities (carbohydrates and proteins; up to 35% reduction), and volatile compounds (up to 35% reduction). Significant reductions of nitrogen, chlorine, and phosphorus (approximately 30–50%) were also achieved. Overall, aqueous acid washing represents a promising complementary refining approach for upgrading CAO by increasing fatty matter concentration and reducing impurity burdens prior to downstream processing.
No takes yet. Share an insight, caveat, or question.
P'Ng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: