Answers are grounded in this paper and cite their sources.
PURPOSE: This study evaluated the fracture resistance of premolar screw-retained implant-supported hybrid abutment crowns (HACs) fabricated from different monolithic restorative materials following artificial aging. MATERIALS AND METHODS: Forty-four titanium implant analogs were restored with HACs fabricated from four materials: 5 mol% yttria-partially stabilized monolithic zirconia (ST), strength-gradient multilayered zirconia (YM), lithium disilicate ceramic (LD), and resin composite containing dispersed nanoparticles (CM) (n = 11 per group). All specimens were subjected to thermocycling (10,000 cycles) and mechanical loading (1.2 million cycles) to simulate 5 years of clinical service. Fracture resistance was evaluated under compressive loading, and failure modes were analyzed using optical microscopy and scanning electron microscopy. Statistical analysis was performed using the Kruskal-Wallis and Steel-Dwass tests (α = 0.05). The YM group exhibited the highest median fracture resistance (2.06 kN, IQR: 2.00 - 2.60 kN), followed by ST (1.74 kN, IQR: 1.69 - 1.80 kN), LD (1.29 kN, IQR: 1.14 - 1.41 kN), and CM (0.87 kN, IQR: 0.79 - 0.92 kN). All specimens survived the artificial aging protocols. Distinct fracture patterns were observed depending on the restorative material, with zirconia-based groups showing more favorable resistance than resin composite. CONCLUSION: All tested HACs exhibited fracture resistance values exceeding maximum bite forces, supporting their clinical applicability. Strength-gradient multilayered zirconia demonstrated superior reliability after simulated 5-year aging, emphasizing its structural advantage and broader safety margin compared with other restorative materials.
No takes yet. Share an insight, caveat, or question.
Honda et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: