Answers are grounded in this paper and cite their sources.
In this paper, a new band-notched UWB BPF with a very wide upper stopband is designed using a λ/4-type multi-mode resonator (MMR). The proposed MMR, being formed by combining two identical λ/4 tri-section stepped-impedance resonators (TSSIRs) in a structure-shared fashion, exhibits both λ/4 and embedded λ/2 types of resonance with a relatively smaller circuit size. By properly locating the first four resonant modes of the MMR and the coupling peaks of the input/output parallel-coupled lines, a five-transmission-pole UWB BPF is realized with a favorable uniform in-band UWB response. Besides the good UWB performance, a 5-GHz notched band is created by embedding in the output feed line a T-shape lumped-element bandstop structure to reject the influence from WLAN signals. Also, a very wide upper stopband is achieved by implementing a compact bandstop filter structure in the input feed line together with the properly located transmission zeros generated by the input/output interdigital-coupled lines and the second harmonic of the T-shape bandstop structure. A prototype of the proposed UWB BPF was fabricated and measured for performance verification. The measured results show a return loss of higher than 10 dB, a minimum insertion loss of 0.41 dB, and a group delay variation of less than 0.11 ns in the UWB passband except the notch. The notched band has a 3-dB bandwidth of 18%. The measured upper-end –20-dB stopband ranges from 11.94 to 30.56 GHz, with a bandwidth of 18.62 GHz.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: