Answers are grounded in this paper and cite their sources.
In this work, we investigate the impact of the recessed height of the i‐gallium nitride (GaN) layer on the performance of superjunction AlGaN/GaN high electron mobility transistors (HEMTs). The recessed height ( h ) of the superjunction layer is systematically varied from 0 to 30 nm while keeping all other device dimensions and biasing conditions constant. The results demonstrate significant enhancements in both DC and analog/RF characteristics with increasing recessed height. At a recessed height of 30 nm, the ON‐state current increases by 45.65%, transconductance rises by 35.38%, and ON‐state resistance decreases by 34.56% compared to the nonrecessed structure. Although the breakdown voltage (BV) decreases by 5%, the highest figure of merit (FOM) is achieved at the maximum recessed height. The threshold voltage shifts to positive values for recessed heights exceeding 25 nm, confirming enhancement‐mode operation. A maximum cutoff frequency of 505 GHz is found at h = 30 nm, which is only 377 GHz for the device without recessing the superjunction region. The other RF performance parameters, including cutoff frequency, maximum oscillation frequency, and transit frequency product, attain significantly higher values at the maximum recessed height. The intrinsic voltage gain and gain product terms show their maximum for h = 0 nm. While intermodulation distortion (IMD 3 ) rises marginally, the total harmonic distortion (THD) reduces by 23 dB, highlighting the device’s suitability for low‐distortion analog and RF applications at h = 30 nm. Overall, the 30 nm recessed superjunction HEMT is a promising candidate for advanced analog and RF circuits by combining its enhancement‐mode operation and superior analog/RF performance.
No takes yet. Share an insight, caveat, or question.
Banu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: