Answers are grounded in this paper and cite their sources.
Aiming to develop more robust, mechanically advanced, Fused Filament Fabrication (FFF) materials, High-Density Polyethylene (HDPE) nanocomposites were developed in the current research work. Titanium Dioxide (TiO2) was selected as filler to be incorporated into the HDPE matrix in concentration steps of 0.5, 2.5, 5, and 10 wt.%. 3D printing nanocomposite filaments were extruded in ~1.75 mm diameter and used to 3D print and test tensile and flexion specimens according to international standards. Reported results indicate that the filler contributes to increasing the mechanical strength of the virgin HDPE at certain filler and filler type concentrations; with the highest values reported to be 37.8% higher in tensile strength with HDPE/TiO2 10 wt.%. Morphological and thermal characterization was performed utilizing Scanning Electron Microscopy (SEM), Raman, Thermogravimetric Analysis (TGA), and Differential Scanning Calorimetry (DSC), while the results were correlated with the available literature.
No takes yet. Share an insight, caveat, or question.
Vidakis et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: