Field method for determination of traces of thiols in natural waters

Derivatization with 2,2′-dithiobis(5-nitropyridine) (DTNP) was used to stabilize thiols in field samples and to determine these compounds by liquid chromatography (LC) with ultraviolet detection. Alternatively, the thiols can be regenerated from DTNP derivatives using tributylphosphine (TBP) and derivatized with o-phthalaldehyde (OPA). The DTNP derivatives were stable at pH 5 and 6 for more than 2 weeks in the reaction mixture, but the stability was considerably lower at pH values > 8. Derivatization at pH 6 was routinely done and the reaction was complete within 5 min. The derivatives can be extracted quantitatively on commercial C18 cartridges, which allows several-fold sample enrichment. The cartridge-adsorbed derivatives are stable at 0–5 °C for long periods and, therefore, can be stored for LC separation at a later date. DTNP derivatives of ten low-molecular-weight thiols were separated on a C18 microbore column using gradient elution and a flow-rate of 200 μl min−1. The relative standard deviation based on repeated analyses of standards is about 5% in the range 0.5–2 nM. Without C18 cartridge enrichment, the detection limits of the studied thiols are in the range 50–100 nM. These limits are further reduced by about 100-fold by using the OPA method after regeneration of thiols from the DTNP derivatives using TBP. Applications of the method to coastal sediment pore water and anoxic Black Sea water are illustrated.