Answers are grounded in this paper and cite their sources.
By using the resonant vibrations of metal spheres it is possible to separate the contributions involving different amounts of shear, hydrostatic, and longitudinal strain merely by choosing the appropriate resonant frequencies. Birch [J. Geophys. Res. 80, 756–764 (1975)] has applied this method to the radical, spheriodal, and torsional modes of metals, glasses, and rocks. He has shown that if there is no loss connected with the hydrostatic component of vibration, the ratio of the Q of the radial mode to the Q of the torsional modes should be 9 to 1 whereas his measurements of steel indicated a ratio of about 3 to 1. We have measured several cubic metals (Al, Fe, Ta, Nb, W, V, and α-brass) and have found that this ratio of Q’s varies systematically with elastic anisotrophy. It is shown that the difference in the elastic constants of adjacent grains introduces a shearing stress in the body of the material which adds a component of the internal friction proportional to the anisotropic factor minus one which accounts for the drop in Q for a longitudinal vibration. For the radical mode the much larger effect has not been explained and the value of K found is experimental.
No takes yet. Share an insight, caveat, or question.
Mason et al. (1977) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: