Answers are grounded in this paper and cite their sources.
In this work, antiwear nanoimprint templates were made by depositing and patterning diamondlike carbon (DLC) films on Si and quartz. A capacitively coupled plasma enhanced chemical vapor deposition (PECVD) system was configured to deposit 100nm–1μm thick DLC films on Si and quartz substrates. These films were characterized with Raman spectroscopy, electron energy loss spectroscopy, atomic force microscopy, nanoindentation, contact angle measurements, and optical transmission measurements. The rf power and pressure of the PECVD process were varied to obtain uniform coating of DLC films with smooth surface (∼0.2nm rms), low surface energy (∼40mJ∕m2), and high hardness (∼22GPa). The resulting films’ wear resistance is more than three times better than quartz. The DLC films were patterned by nanoimprint lithography using polymethylmethacrylate (PMMA) followed by CF4 plasma etch. Thermal nanoimprint tests with DLC templates were performed in PMMA. Atomic force microscopy measurements indicated excellent pattern-transfer fidelity and template-polymer separation.
No takes yet. Share an insight, caveat, or question.
Ramachandran et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: