Answers are grounded in this paper and cite their sources.
Lithium zirconates, Li 2 ZrO 3 and Li 6 Zr 2 O 7, were synthesized by solid-state reaction. The thermal analyses of Li 6 Zr 2 O 7 showed a continuous decomposition process due to lithium sublimation. However, the thermal behavior of this compound changed slightly when different gas environments were used. If nitrogen was used, Li 6 Zr 2 O 7 decomposed in a mixture of Li 2 ZrO 3, ZrO 2, and Li 2 O (g) . Nevertheless, air environment produced a different and more complex decomposition mechanism at high temperatures. In this case, lithium reacted with the oxygen from the air to produce Li 2 O at the surface, producing a temporary increase of the total weight. Subsequently, Li 2 O and some oxygen, from the Li 6 Zr 2 O 7 structure, sublimed to produce Li 2 ZrO 3 and ZrO 2 . The CO 2 absorption capacity of both zirconates was studied. The materials absorbed CO 2 at around the same temperature, 450−650 °C. Still, Li 6 Zr 2 O 7 absorbed 4 times more CO 2 than Li 2 ZrO 3 . Furthermore, the CO 2 sorption rate of Li 2 ZrO 3 was much slower than that of Li 6 Zr 2 O 7 at short times. Apparently, at the beginning of the absorption process, there was more lithium available to react with CO 2 in the Li 6 Zr 2 O 7 sample, as expected, although the sorption rates of both ceramics became similar after long times. A correlation is established between the lithium and CO 2 diffusion through the Li 2 CO 3 produced on the surface of the particles. The best temperature for the CO 2 absorption on Li 6 Zr 2 O 7 was 550 °C. Finally, XRD analyses, after the CO 2 absorption, and cyclic thermogravimetric analyses showed that Li 6 Zr 2 O 7 was not regenerated. In all cases, the final product was Li 2 ZrO 3 .
No takes yet. Share an insight, caveat, or question.
Pfeiffer et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: